Non Standard Ball Bearings Flat bearings are roller bearings and cylindrical roller composed of flat bracket, which is divided into needle roller bearings and spherical plain bearings. Its role is to maintain the needle roller and cylindrical roller flat type. When used in conjunction with different flat washers, there are different combinations of bearings. The advantage is to increase the length of the contact between the device and the device, so that the bearing in a smaller space can get high carrier load capacity and high stiffness. But also reduce the edge of the application force, to extend its service life.
The following are the same as the "
Non Standard Ball Bearings are non-standard size or do not meet the requirements of the size of the bearing, that is, the appearance and design dimensions do not meet the standards of the relevant requirements of the bearing. It is suitable for some special requirements of the equipment, because the size is different from the standard bearing size requirements, it must find some bearing manufacturers custom, the production of the number of batches, and the design has some limitations, so non-standard bearing prices are generally expensive. Some of its parts, such as the size of the ball, must be customized according to the specific size.
The production process of Non Standard Ball Bearings is from cutting to assembly of one-stop, from the original bearing blank to finished products, process complicated and trivial. At first, the middle of each process is the need for manual operation, after two years of equipment replacement, the enterprise workers significantly less than before. In the enterprise metalworking workshop, you can easily identify two sets of equipment is nearly two years of new introduction. These two sets of equipment have a free telescopic movement of the robot, the workers are called "metal cutting robot." And other equipment in the same workshop, it can also make the metal from the dull rough become smooth and shiny. However, because it is "robot", its efficiency doubled, reduced consumption and other advantages is obvious, the degree of automation is not necessary to say. It is worth mentioning that the robot instead of the workers hand, but also makes the production process more secure.
Non Standard Ball Bearings , in layman's terms, is the size of the bearing is different from the national standard. Low degree of versatility, customer demand differences, small batch is its main feature. It is precisely because of these particularity, the past two years, Rugao non-standard Bearing Co., Ltd. of the technical transformation of the road can be said to be difficult, the company up and down are deeply experience. Fortunately, the company finally reached the desired goal, the first bite the industry under the hard bones, which also means that in the industry to win the initiative and advantages.