Home > News > Content
Non Standard Ball Bearings To Do Regular Maintenance And Regular Inspection
Aug 07, 2017

Non Standard Ball Bearings how rust, what is a good way?

The same time as

First, the surface cleaning method:

The same time as

1, surface cleaning: cleaning must be based on the nature of the surface of the rust and the conditions at that time, select the appropriate method. Commonly used solvent cleaning method, chemical treatment cleaning method and mechanical cleaning method.

The same time as

2, the surface dry and clean can be filtered dry compressed air drying, or 120 ~ 170 ℃ dryer for drying, can also be dry with a dry gauze.

The same time as

Second, the application of anti-rust oil method:

The same time as

1, soaking method: some small items soaked in rust-proof grease, so that the surface adhesion of a layer of anti-rust grease method. Oil film thickness can be achieved by controlling the temperature or viscosity of the rust-proof grease.

The same time as

2, brushing method is not suitable for immersion or spraying of outdoor construction equipment or special shape of the product, brush should not only pay attention to the accumulation, but also to prevent leakage coating.

The same time as

3, spray a number of large-scale anti-rust can not use the soaking method of oil, generally with about 0.7Mpa pressure filter compressed air in the air cleaning place for spraying. Spray method for solvent dilution type anti-rust oil or thin layer of anti-rust oil, but must be used to improve the fire and labor protection measures.

Non Standard Ball Bearings maintenance, fine rough way to wash.

Maintenance and maintenance of Non Standard Ball Bearingss: In order to make Non Standard Ball Bearingss better use and for a long time to maintain their ability, must do a regular maintenance and regular maintenance. Appropriate periodic inspections can help prevent early detection and prevent accidents from happening, helping to increase productivity and economic growth. First of all, Non Standard Ball Bearings cleaning work, the Non Standard Ball Bearingss removed to check, first do the appearance of the shooting record, and secondly to ensure that the amount of lubricant remaining and the lubricant sampling, and finally Non Standard Ball Bearingss for cleaning.

Cleaning Non Standard Ball Bearings the way:

1. Non Standard Ball Bearings cleaning is divided into two kinds of fine washing and rough washing, and can be used in the bottom of the container put metal mesh.

2. Refined Non Standard Ball Bearingss when the oil slowly rotating Non Standard Ball Bearingss, to carefully carried out. The general use of the cleaning agent is neutral without water diesel and kerosene, and sometimes also need to use warm alkaline. No matter what kind of cleaning agent, must always filter and keep clean.

3. Rinse the Non Standard Ball Bearingss, in the oil with a brush to clean the grease and sticky material. At this time if the rotation in the oil Non Standard Ball Bearingss, should pay attention to because of foreign bodies such as damage rolling surface.


Subscribe to our email list
Sign up with your name and email to get the latest proway updates, exclusive access to promotions, sales events, pre-order sales & more!
Connect with HANQI
Become our fan, follow us & subscribe for the latest updates and deals
QR Code
  • About Us
  • Products
  • News
  • Knowledge
  • Contact Us
  • Feedback
  • Copyright © Cixi HANQI Rolling Co.,Ltd All rights reserved.